Proflex

Company: Control Solutions

LAMBDA-CYHALOTHRIN 3A INSECTICIDE

NOVALURON GROUP 15 INSECTICIDE

PYRIPROXYFEN GROUP 7C INSECTICIDE

Encapsulated Solutions

● Effective control of Fleas, Cockroaches, Flies, Mosquitoes, Gnats, Crickets & Ants

● Contains adulticide and two IGRs

● Convenient combination product

● For indoor/outdoor use

For use in, on and around buildings and structures for the control of listed pests. May also be used on lawns, turfgrass, ornamental trees, ornamental grasses and shrubs around residential, institutional, public, commercial, agricultural and industrial buildings, parks, recreational areas, golf course out of play areas (including native planting areas, around clubhouses, outbuildings and on-course lavatories) and athletic fields.

Active Ingredients

Lambda-cyhalothrin and Pyriproxyfen are encapsulated

**Synthetic pyrethroid

Contains 0.34 lbs. Lambda-cyhalothrin, 0.11 lbs. Novaluron and 0.11 lbs.

Pyriproxyfen per gallon.

KEEP OUT OF REACH OF CHILDREN

Proflex Caution

Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you DO NOT understand the label, find someone to explain it to you in detail.)

First Aid

IF SWALLOWED:

● Call a poison control center or doctor immediately for treatment advice.

● Have person sip a glass of water if able to swallow.

● DO NOT induce vomiting unless told to do so by the poison control center or doctor.

● DO NOT give anything by mouth to an unconscious person.

IF ON SKIN:

● Take off contaminated clothing.

● Rinse skin immediately with plenty of water for 15-20 minutes.

● Call a poison center or doctor for treatment advice.

Have the product container or label with you when calling a poison control center or doctor or going for treatment. You may also contact SafetyCall^® International for emergency medical treatment at (866) 897-8050.

PRECAUTIONARY STATEMENTS

HAZARDS TO HUMANS AND DOMESTIC ANIMALS

Proflex Caution

Harmful if swallowed. Avoid contact with skin or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet.

ENVIRONMENTAL HAZARDS

This product is extremely toxic to fish and aquatic invertebrates. To protect the environment, DO NOT allow pesticide to enter or run off into storm drains, drainage ditches, gutters, or surface waters. Applying this product in calm weather when rain is not predicted for the next 24 hours will help ensure that wind or rain does not blow or wash pesticide off the treatment area. Rinsing application equipment over the treated area will help avoid runoff to water bodies or drainage systems. Drift and runoff from treated areas may be hazardous to aquatic organisms in neighboring areas. Apply this product only as specified on the label.

This product is highly toxic to bees exposed to direct treatment or residues on blooming crops or weeds. DO NOT apply this product or allow it to drift to blooming crops or weeds if bees are foraging the treatment area.

PHYSICAL AND CHEMICAL HAZARDS

DO NOT mix or allow contact with oxidizing and reducing agents or a hazardous chemical reaction may occur. DO NOT use this product in or on electrical equipment due to the possibility of shock hazard.

Product Information

ProFlex includes an adulticide and 2 insect growth regulators. The insect growth regulators, novaluron and pyriproxyfen, prevent immature insects from developing into reproductive adults. The adulticide, lambda-cyhalothrin, will kill insect pests. ProFlex is for use as a general surface (nonfood/nonfeed areas), crack and crevice, or spot treatment in, on, and around buildings and structures and their immediate surroundings, and on modes of transport. Areas of use include: industrial buildings, houses, beneath awnings, porches, closets, furniture, apartment buildings, mobile homes, laboratories, buses, greenhouses (non-commercial), stores, factories, warehouses, wineries, vessels, railcars, trucks, trailers, aircraft (cargo and other non-cabin areas only), schools, nursing homes, hospitals, mausoleums, restaurants, hotels, correctional facilities, livestock/ poultry housing, pet kennels, food granaries, food grain mills and food manufacturing, processing, and servicing establishments. ProFlex may also be used on lawns, turfgrass, ornamental trees, ornamental grasses and shrubs around residential, institutional, public, commercial, agricultural and industrial buildings, parks, recreational areas, golf course out of play areas (including native planting areas, around clubhouses, outbuildings and on-course lavatories) and athletic fields.

Directions For Use

It is a violation of federal law to use this product in a manner inconsistent with its labeling.

IMPORTANT: Not for use on plants being grown for sale or other commercial use, or for commercial seed production, or for research purposes. For use on plants intended for aesthetic purposes or climatic modification and being grown in interior plantscapes, ornamental gardens or parks, or on lawns or grounds.

Resistance-Management Recommendations

For resistance management, please note that ProFlex contains a Group 3A (Lambda Cyhalothrin), a Group 15 (Novaluron) and a Group 7C (Pyriproxyfen) insecticide. Any insect population may contain individuals naturally resistant to ProFlex and other Group 3A, 15 or 7C insecticides. The resistant individuals may dominate the insect population if this group of insecticides are used repeatedly in the same fields/sites. Appropriate resistance-management strategies should be followed.

To delay insecticide resistance, take the following steps:

● Use tank mixtures with insecticides from a different group that are equally effective on the target pest when such use is permitted. DO NOT rely on the same mixture repeatedly for the same pest population. Consider any known cross-resistance issues (for the targeted pests) between the individual components of a mixture. In addition, consider the following recommendations provided by the Insecticide Resistance Action Committee (IRAC):

• Individual insecticides selected for use in mixtures should be highly effective and be applied at the rates at which they are individually registered for use against the target species.

• Mixtures with components having the same IRAC mode of action classification are not recommended for insect resistance management.

• When using mixtures, consider any known cross-resistance issues between the individual components for the targeted pest(s).

• Mixtures become less effective if resistance is already developing to one or both active ingredients, but they may still provide pest management benefits.

• The insect resistance management benefits of an insecticide mixture are greatest if the two components have similar periods of residual insecticidal activity. Mixtures of insecticides with unequal periods of residual insecticide activity may offer an insect resistance management benefit only for the period where both insecticides are active.

● Adopt an integrated pest management program for insecticide use that includes scouting, uses historical information related to pesticide use, crop rotation, record keeping, and which considers cultural, biological and other chemical control practices.

● Monitor after application for unexpected target pest survival. If the level of survival suggests the presence of resistance, consult with your local university specialist or certified pest control advisor.

● Contact your local extension specialist or certified crop advisor for any additional pesticide resistance-management and or IPM recommendations for the specific site and pest problems in your area.

● For further information or to report suspected resistance contact Control Solutions, Inc. at 800-242-5562 or at controlsolutionsinc.com

SPRAY DRIFT ADVISORIES

THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT.

BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.

IMPORTANCE OF DROPLET SIZE

An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made improperly or under unfavorable environmental conditions.

SHIELDED SPRAYERS

Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers.

Verify that the shields are not interfering with the uniform deposition of the spray on the target area.

TEMPERATURE AND HUMIDITY

When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.

TEMPERATURE INVERSIONS

Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Avoid applications during temperature inversions.

WIND

Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS.

Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.

Handheld Technology Applications:

Take precautions to minimize spray drift.

This product is RESTRICTED for use in New York State.

USE RESTRICTIONS

● DO NOT allow children or pets to contact treated surfaces until spray has dried.

● DO NOT apply by aerial application.

● DO NOT apply this product in any room being used as living, eating, sleeping, or recovery area by patients, the elderly, or infirm while they are in the room.

● DO NOT apply to institutions (including libraries, sports facilities, etc.,) in the immediate area when occupants are present.

● DO NOT apply to classrooms when in use.

● DO NOT apply this product to edible growing crops or stored raw agricultural commodities used for food or feed.

● DO NOT allow applications to contact water inhabited by fish, such as in aquariums and ornamental fish ponds that are located in/around sites/structures being treated.

Application Restrictions for Residential Outdoor Surface and Space Sprays:

● All outdoor applications must be limited to spot or crack and crevice treatments only, except for the following permitted uses:

1. Applications to soil or vegetation around structure;

2. Applications to lawns, turf, and other vegetation;

3. Applications to building foundations, up to a maximum height of 2 feet above grade;

4. Applications to underside of eaves, soffits, doors, or windows permanently protected from rainfall by a covering, overhang, awning or other structure;

5. Applications around potential pest entry points into buildings, when limited to a surface band not to exceed one inch in width;

6. Applications made through the use of a coarse, low pressure spray to only those portions of surfaces that are directly above bare soil, lawn, turf, mulch or other vegetation, as listed on the label, and not over an impervious surface, drainage or other condition that could result in runoff into storm drains, drainage ditches, gutters, or surface waters, in order to control occasional invaders or aggregating pests.

● DO NOT water the treated area to the point of runoff after application.

● DO NOT make applications during rain.

● DO NOT apply directly to sewers or drains, or to any area like a gutter where drainage to sewers, storm drains, water bodies, or aquatic habitat can occur, except as directed by the label.

● In New York State, this product may not be applied to turf within 100 ft. of a coastal marsh or streams that drain into a coastal marsh.

Mixing Instructions

Dilute ProFlex with water for application using hand-held or power-operated application equipment as a coarse spray for crack and crevice or spot and general surface (nonfood/ nonfeed areas only) treatments. Application equipment that delivers low volume treatments, such as the Actisol^® applicator or other similar low volume spray equipment, may also be used to make crack and crevice or spot and general surface treatments. Fill applicator tank with the desired volume of water and add ProFlex. Close and shake before use in order to ensure proper mixing. Shake or reagitate applicator tank before use if application is interrupted. Mix only amount of treatment volume as required. ProFlex may be applied by using a paintbrush or other porous applicator attached to a handle as a general surface treatment. If mixture sits for more than 2 hours, shake well before application.

Tank Mixing

ProFlex may be tank mixed with other currently registered pesticides unless expressly prohibited by the product label. It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. A small volume mixing test with the other products is recommended to ensure compatibility. If other chemicals are added to the applicator tank, add ProFlex last. If mixed with EC formulations, use within 24 hours. Fill tank to desired volume and continue to agitate while making applications. Unless otherwise noted in the label instructions, use the procedure below for preparation of a new tank mix:

● Add wettable powders to tank water

● Mix well

● Add liquids and flowables

● Mix well

● Add emulsifiable concentrates

● Mix well

Try reversing the order of addition or increasing the amount of water if the combination is not compatible using the above order. NOTE: After increasing the amount of water, if the mixture is found to be compatible, it is necessary to recalibrate the sprayer for a higher volume application. If mixture is allowed to sit for more than 2 hours, shake well before application. DO NOT allow mixtures to stand overnight.

Foam Applications

ProFlex may be converted to a foam and the foam used to treat structural voids to control or prevent pests including ants, bees, termites (above ground only), wasps, stored product pests, or other listed arthropods harboring in walls, under slabs, or in other void areas.

FOOD HANDLING ESTABLISHMENTS

(Places other than private residences in which food is held, processed, prepared, or served):

Food/feed handling establishments are any place other than private residences where exposed food/feed is held, processed, prepared or served, including areas for receiving, storing, packing (bottling, boxing, canning, wrapping), preparing, enclosed processing systems (dairies, edible oils, mills, syrups) of food and edible waste storage. Serving areas where food is exposed and the facility is in operation are also considered food areas.

Use sites that are allowed: Aircraft (cargo areas only), apartments, buildings, bakeries, bottling facilities, breweries, buses, cafeterias, candy plants, canneries, dairy product processing plants, food manufacturing plants, food processing plants, food service establishments, granaries, grain mills, hotels, industrial buildings, laboratories, meat/poultry/egg processing plants, mobile/motor homes, nursing homes, offices, railcars, restaurants, schools, ships, trailers, trucks, vessels, warehouses , wineries.

Nonfood areas in which applications are allowed: entries and vestibules, floor drains (to sewers), garages, garbage rooms, lavatories, locker rooms, machine rooms, mop closets, offices, and storage (after canning or bottling).

Application within Food Serving Areas: For facilities where foods are served, apply as a crack and crevice or spot treatment to surfaces: baseboards, under elements of construction, and into voids or where pests are likely to harbor. DO NOT treat surfaces likely to be contacted by food. DO NOT apply when facility is in operation or foods are exposed. Food must be removed in area being treated. DO NOT apply directly to food or allow applications to contaminate food.

Application within Food and Non-food Areas: If used as a spot or crack and crevice treatment, ProFlex may be applied in both food/feed and non-food areas of food/feed handling establishments.

Use as a crack and crevice or spot treatment in and around both food and non-food areas. Apply in small amounts directly into cracks and crevices, using equipment capable of delivering a pin stream of insecticide, in points between different elements of construction, between equipment and floor, openings leading to voids and hollow spaces in walls, equipment and bases. Clean food contact surfaces and equipment with an effective cleaning compound and rinse with potable water before using.

Limit individual spot treatments to an area no larger than 20% of the treatable surface. Individual spot treatments may not exceed two sq. ft. Take extreme care that the product is not introduced into the air. DO NOT contaminate food and food processing surfaces.

WAREHOUSES and GROCERY/PET STORES: ProFlex dilution may be applied as a spot or crack and crevice treatment in food and nonfood storage warehouses and stores. Apply to all areas that may harbor pests, including under and between pallets, bins, and shelves. DO NOT apply directly to food, grain bins (interior), or animals.

Food must be removed in area being treated. DO NOT apply directly to food or allow applications to contaminate food.

RATES FOR PESTS:

ANTS (Including Imported Fire Ants):

USE RESTRICTIONS:

● In the home, cover all exposed food processing surfaces and utensils during treatment or thoroughly wash before use if contaminated. Remove exposed food.

● DO NOT permit humans or pets to contact treated surfaces until the spray has dried.

● Applications to building foundations are restricted to a maximum height of 2 feet above grade.

BED BUGS:

USE RESTRICTIONS:

● DO NOT apply to furniture surfaces or mattresses where people will be laying or sitting.

● DO NOT treat infested bedding, instead place items in sealed plastic bags, and take for laundering and drying at high temperatures.

COCKROACHES, CRICKETS, EARWIGS, PILLBUGS, SCORPIONS, AND SPIDERS:

USE RESTRICTIONS:

● In the home, cover all exposed food processing surfaces and utensils during treatment or thoroughly wash before use if contaminated. Remove exposed food.

● DO NOT permit humans or pets to contact treated surfaces until the spray has dried.

● DO NOT spray into the air; only spray onto the specific use sites.

● Applications to building foundations are restricted to a maximum height of 2 feet above grade.

FLEAS AND TICKS:

USE RESTRICTIONS:

● Remove pets prior to spraying treatment area.

● DO NOT permit humans or pets to contact treated surfaces until the spray has dried.

● DO NOT spray into the air; only spray onto the specific use sites. DO NOT spray when wind conditions could create a mist to blow back to applicator.

● DO NOT apply this product in or around bodies of water.

● DO NOT soak young or flowering plants.

● Applications to building foundations are restricted to a maximum height of 2 feet above grade.

● DO NOT apply to pasture or cropland.

FLYING INSECT PESTS (Bees, Flies, Gnats, Hornets, Midges, Mosquitoes, Moths, and Wasps):

ProFlex may be used for the control of house flies, stable flies, moths, mosquitoes, nuisance flies (gnats, midges) and other similar flying pest insects. The insect growth regulators in ProFlex cause a decrease in the number and hatching of eggs laid by treated adults. Fly larvae (maggots) treated with ProFlex cannot develop into normal adults.

ProFlex may be used for control of flying insect pests in, on and around residential, commercial, public, industrial and agricultural buildings. ProFlex may be used to control nuisance flies, gnats, midges, and mosquitoes by application into moist breeding areas (potted plants, moist debris or litter) or into areas holding standing water such as gutters, drains, pools and fountains.

USE RESTRICTIONS:

● In the home, cover all food processing surfaces and utensils during treatment or thoroughly wash before use if contaminated. Remove exposed food.

● DO NOT permit humans or pets to contact treated surfaces until the spray has dried.

● DO NOT spray into the air; only spray onto the specific use sites.

● Applications to building foundations are restricted to a maximum height of 2 feet above grade.

● DO NOT make outdoor broadcast applications when wind speed is 15 mph or greater.

*Dilution chart for mosquito control applications only

STORED PRODUCT PESTS (Including Carpet Beetles, Cigarette Beetles, Confused Flour Beetles, Dermestid Beetles, Indian Meal Moths, Lesser Grain Borers, Merchant Grain Beetles, Red Flour Beetles, Rice Moths, Tobacco Moths, Saw-toothed Grain Beetles, and Warehouse Beetles):

Spray Mixing for Surface, Spot, Crack and Crevice Application: Prepare a diluted spray solution by adding 1 fluid ounce of ProFlex per gallon of water. Partially fill the mixing container with water, add ProFlex, agitate and fill to final volume. Agitate before each spray application.

USE RESTRICTIONS:

● Remove all utensils, uncovered foodstuffs (or any having original package opened), and shelf paper before making application. Allow treated surfaces to dry and cover shelves with clean paper before replacing any utensils, foodstuff, or other items. Exposed food should be covered or removed.

● Destroy any foodstuff accidentally contaminated with treatment solution.

● DO NOT permit humans or pets to contact treated surfaces until the spray has dried.

● DO NOT spray into the air; only spray onto the specific use sites.

● During any overhead applications to overhead interior areas of structures, except for soil surfaces in crawlspaces, cover surfaces below with plastic sheeting or similar materials.

● Wear protective clothing, unvented goggles, gloves and respirator, when applying to overhead areas or in poorly ventilated areas. DO NOT touch sprayed surfaces until spray has completely dried.

OCCASIONAL INVADERS (:Beetles, Boxelder Bugs, Centipedes, Earwigs, Firebrats, Millipedes, Silverfish, Sowbugs, Stink Bugs and other aggregating pests):

USE RESTRICTIONS:

● In the home, cover all exposed food processing surfaces and utensils during treatment or thoroughly wash before use if

contaminated. Remove exposed food.

● DO NOT permit humans or pets to contact treated surfaces until the spray has dried.

● DO NOT spray into the air; only spray onto the specific use sites.

● Applications to building foundations are restricted to a maximum height of 2 feet above grade.

LIVESTOCK AND POULTRY HOUSING STRUCTURES

Controls pests of poultry and livestock facilities: biting flies, filth-breeding flies, fleas, litter beetles, hide beetles, bed bugs, mites and ticks. Apply as a general surface (including directed spray) and/or crack and crevice treatment.

Control is enhanced when facilities are cleaned and interior and exterior perimeter applications are made in and around the livestock or poultry housing structures. Normal cleaning practices of the structure also must be followed along with applications of ProFlex to effectively control crawling and flying insect pests.

To control bed bugs, mites and ticks in animal facilities, treat cracks/crevices, walls, posts, nest boxes and mobile side curtains.

For adult fly control in and around animal facilities, spray application to target areas where flies will rest: the ceiling, rafters and trusses. Also treat windows, interior and covered exterior walls and supports, fences and vegetation. ProFlex may be sprayed on manure in areas where fly larvae are abundant and the area cannot be cleaned.

Allow ProFlex to dry before applying disinfectants.

Insecticide Class Rotations: In order to avoid problems with developed resistance to insecticides it is important to rotate to an insecticide of a different class each 2-3 flocks. It is best to attempt to use 3 different classes of insecticides during a calendar year.

RESTRICTIONS:

● DO NOT treat birdcages or stock pens when animals are present.

● DO NOT apply ProFlex directly to animals.

● DO NOT allow animals back in treated areas of facility until treated areas have dried.

● DO NOT apply directly to any natural bodies of water: ponds, lakes, streams, rivers, marshes, potholes, and estuaries.

● DO NOT apply ProFlex to any animal feed, water or watering equipment.

● DO NOT contaminate any animal feed, food or water in and around livestock or poultry housing when making applications.

● DO NOT make interior applications of ProFlex in areas of facility where animals

are present.

ORNAMENTALS AND LAWNS/TURFGRASS

ProFlex may be used for applications to maintain indoor or outdoor areas where turf and ornamentals are grown: residential landscaped areas and non-residential landscapes around institutional, public, commercial and industrial buildings, parks, recreational areas, and athletic fields (including trees, shrubs, flowers, evergreens, foliage plants and groundcovers).

Applicators must ensure that they are certified in the necessary pesticide certification categories to allow application of ProFlex away from structures, such as turf and ornamental plantings. Structural pest control certification categories may limit the distance away from structures for pesticide application. Consult your state extension office or pesticide regulatory officials for further information.

This product is highly toxic to bees exposed to direct treatment or residues on blooming crops or weeds. DO NOT apply this product or allow it to drift to blooming crops or weeds if bees are foraging the treatment area.

IMPORTANT: Time application to flowering plants during periods when pollinating insects are not present, such as early morning or late evening.

RESTRICTIONS:

● DO NOT apply this product through any type of irrigation system.

● DO NOT apply this product to edible crops.

● DO NOT apply this product by aerial application.

● DO NOT use this pesticide adjacent to water where it may affect aquatic organisms. To protect these organisms, DO NOT apply this pesticide within 25 ft. of lakes, reservoirs, rivers, permanent streams, marshes or natural ponds, estuaries, and commercial fish farm ponds.

● DO NOT make outdoor broadcast applications to turf and ornamentals when wind speed is 15 mph or greater.

● In the state of New York, DO NOT apply within 100 ft. of coastal marshes or streams that drain into coastal marshes.

Mixing Instructions

ProFlex is to be mixed with water and may be used in all types of standard application equipment. Fill applicator tank with the desired volume of water and add ProFlex. It is suggested that the water be pH 5-7H. Adjust water pH with a buffering agent if necessary. Slowly add ProFlex to applicator tank water with maximum agitation. Close and shake or re agitate applicator tank before use if application is interrupted. Mix only the minimum volume needed for the area to be treated.

Tank Mixing

ProFlex may be tank mixed with other currently registered pesticides unless expressly prohibited by the product labels. A small volume mixing test (jar test) with the other products is recommended to ensure compatibility. If other chemicals are added to the applicator tank, add ProFlex last. Fill tank to desired volume and continue to agitate while making applications. If mixed with EC formulations, use within 24 hours.

It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

INSECT CONTROL on ORNAMENTAL PLANTS

ProFlex is for use to control the pests listed in the table below in: residential landscaped areas and landscaped areas around institutional, public, commercial and industrial buildings, parks, recreational areas, and athletic fields (including trees, shrubs, flowers, evergreens, foliage plants, non-blooming bedding plants, and groundcovers).

NOTE: While phytotoxicity testing has been carried out on a wide range of ornamental plants under various environmental conditions, and no phytotoxicity has been observed, it is impossible to test all species and varieties. Certain species and cultivars may be sensitive to ProFlex. It is advised to pre-spray a selection of ornamental plants and observe them for 7-10 days prior to treating large areas if local use experience is unavailable.

DILUTION CHART FOR BROADCAST APPLICATIONS

TANK DILUTION RATES FOR ORNAMENTAL PESTS

RESTRICTIONS

● DO NOT apply more than 135.3 fl. oz of ProFlex (0.36 lbs. of lambda-cyhalothrin) per acre per year for lawn and ornamental applications.

● KEEP CHILDREN AND PETS OFF TREATED AREAS UNTIL SPRAY HAS DRIED FOLLOWING APPLICATION.

ProFlex Mixing Chart for Ornamental Insect Pest Control

(ProFlex to add per spray tank)

¹ Equivalent to 0.3 fl. oz. per 1,000 sq. ft. (13.0 fl. oz. per acre) when applied at 8 gal. per 1,000 sq. ft.

² Equivalent to 0.6 fl. oz. per 1,000 sq. ft. (26 fl. oz. per acre) when applied at 8 gal. per 1,000 sq. ft.

³ Equivalent to 1.0 fl. oz. mL per 1,000 sq. ft. (43.5 fl. oz. per acre) when applied at 8 gal. per 1,000 sq. ft.

LAWN/TURFGRASS INSECT PEST CONTROL

ProFlex is for use to control the pests listed in the table below around: residential, institutional, public, commercial and industrial buildings, parks, recreational areas and athletic fields.

RESTRICTIONS:

● KEEP CHILDREN AND PETS OFF TREATED AREAS UNTIL SPRAY HAS DRIED FOLLOWING APPLICATION.

● DO NOT apply when turfgrass is waterlogged or when soils are saturated with water (i.e. will not accept irrigation).

● DO NOT apply more than 135.5 fl. oz of ProFlex (0.36 lbs. of lambda-cyhalothrin) per acre per year for lawn and ornamental applications.

RATES FOR LAWN AND TURFGRASS PESTS

¹ Not for use on chinch bugs in New York state.

* Example: To treat the listed turf pests at the 0.6 fl. oz. per 1,000 sq. ft. rate, determine the gallons of dilution per 1,000 sq. ft. needed to adequately cover the turf. At a 5 gallon per 1,000 sq. ft. dilution, take the 0.6 fl. oz. and divide it by the 5 (gallon) to get 0.12 fl. oz. mL to be added per gallon. For a 50 gallon tank, therefore, this would be 30.12 fl. oz. X 50 = 6 fl. oz. in 50 gallons of water.

STORAGE AND DISPOSAL

DO NOT contaminate water, food or feed by storage or disposal.

PESTICIDE STORAGE AND SPILL PROCEDURES: Store upright at room temperature. Avoid exposure to extreme temperatures. In case of spillage or leakages, soak up with an absorbent material such as sand, sawdust, earth, Fuller’s earth, etc. Dispose of with chemical waste.

PESTICIDE DISPOSAL: Pesticide, spray mixture or rinse water that cannot be used according to label instructions must be disposed of at or by an approved waste disposal facility.

CONTAINER HANDLING:

For Containers equal to or less than 5 Gallons: Nonrefillable container. DO NOT reuse or refill this container. Clean container promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Offer for recycling if available. If recycling is not available, then dispose of container in a sanitary landfill.

LIMITATION OF WARRANTY AND LIABILITY

The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risks inherently associated with the use of this product. Ineffectiveness or other unintended consequences may result because of such factors as manner of use or application, weather, presence of other materials or other influencing factors in the use of the product, which are beyond the control of Control Solutions, Inc. or Seller. To the extent consistent with applicable law, all such risks shall be assumed by Buyer and User, and Buyer and User agree to hold Control Solutions, Inc. and Seller harmless for any claims relating to such factors.

Control Solutions, Inc. warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes stated in the Directions for Use, subject to the inherent risks referred to above, when used in accordance with directions under normal use conditions. This warranty does not extend to the use of this product contrary to label instructions, or under abnormal conditions or under conditions not reasonably foreseeable to or beyond the control of Seller or Control Solutions, Inc., and Buyer and User assume the risk of any such use. To the extent permitted by applicable law, CONTROL SOLUTIONS, INC. MAKES NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS STATED ABOVE.

IT IS CONTROL SOLUTIONS INC., AND SELLERS INTENTION THAT in no event shall Control Solutions or Seller be liable for any incidental, consequential or special damages resulting from the use or handling of this product. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF CONTROL SOLUTIONS, INC., AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION OF CONTROL SOLUTIONS, INC. OR SELLER, THE REPLACEMENT OF THE PRODUCT.

Control Solutions, Inc. and Seller offer this product, and Buyer and User accept it, subject to the foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be modified except by written agreement signed by a duly authorized representative of Control Solutions, Inc.

Actisol^® is a registered trademark of Environmental Delivery Systems, Inc.

Micro-Injector^® is a registered trademark of Whitmire Micro-gen Research Laboratories, Inc.

Manufactured by: Control Solutions Inc., 5903 Genoa-Red Bluff, Pasadena, TX 77507

A member of Adama

Consumer and Professional Solutions

EPA Reg. No. 53883-427

EPA Est. No. 53883-TX-002

CPN: 1511050.0